MBG104 Peacock Green – Coyote

14,60

MBG104 Peacock Green
Frank’s Celadons
Steengoed/ stoneware
fire at cone 5/6
stooktemperatuur 1180 – 1220 graden

Op voorraad

Artikelnummer: MBG104 Categorieën: , Tags: , , , , , ,
Onze best verkochte Celadon! Een diep doorschijnend groen, dat naar een troebel blauw verkleurt waar het het dikst is. Peacock Green wordt niet aanbevolen voor voedselwaren, omdat het van kleur kan veranderen bij blootstelling aan zuren zoals citroen of azijn.

Frank’s Colored Celadons zijn een prachtige serie doorschijnende glazuren. Omdat ze doorschijnend zijn, zijn ze perfect voor werk met fijne details of snijwerk, of als alternatief voor doorschijnend glazuur voor werk met onderglazuur. Ze lopen niet uit en zien er prachtig uit op zichzelf of in combinatie met andere glazuren.

Our best-selling Celadon! A deep translucent green, which pools to a cloudy blue where thickest. Peacock Green is not recommended for food ware, as it can change color when exposed to acids such as lemon or vinegar.

Frank’s Colored Celadons are a beautiful series of translucent glazes.  Because they can be seen through, they are perfect for work with fine details or carving, or as an alternative to clear for ware with underglaze.  They do not run and look great on their own or combined with other glazes.

Firing

Every kiln and firing is different. It is best to use witness cones in every firing.

Coyote glazes are designed to be fired between witness cone 5 and witness cone 6.

Cone readings are a combintation of time and temperature, and do not correspond directly to any specific temp in degrees. Most digitally controlled kilns have a pre-programmed cone fire setting that will allow you to reach the proper temperature with minimal fussing (we use a cone 5, fast, with 30 minute hold.) For manual (sitter) kilns we recommend using a 6 cone.

Thermocouples and other electronic measuring devices are prone to error and degrade over time. The only way to be certain that your kiln is firing to the right temperature is to use witness cones every time you fire your kiln.
The tip of your self supporting cone 5 should be at least even with the base, and the tip of the cone 6 should not touch the shelf.

May not fit all clay bodies. Test for shivering on your clay.
Store in a warm place. Crystals may form in liquid glaze if kept below 65°F
Test all foodware to determine food safety.

 

MELD U AAN VOOR DE NIEUWSBRIEF