MBG150 Blue Moon – Coyote

17,20

MBG150 Blue Moon
Two step Oilspot serie
Steengoed/ stoneware
fire at cone 5/6
stooktemperatuur 1180 – 1220 graden

 

Op voorraad

Blue Moon is een van de Texas Two Step Overcoats, wat betekent dat het kan worden gelaagd met Licorice, Coffeebeen of Brick Red om een olievlekeffect te creëren. Het is ook een prachtig zacht blauw op zich, waardoor het geschikt is voor decoratieve en gebruiksgoed.

De Texas Two-Step Oilspots zijn een gespecialiseerde serie die gebruik maken van paren van glazuren om unieke effecten te creëren. Overal waar één van de vijf overcoats bovenop Licorice, Coffe Bean of Brick Red wordt gelegd, zal tijdens het bakken een prachtig gevlekt patroon verschijnen. Dikkere toepassingen leiden tot grotere vlekken. Probeer na de eerste laag wax te gebruiken om negatieve ruimteontwerpen te creëren.

Blue Moon is one of the Texas Two Step Overcoats, meaning it can be layered with Licorice, Coffee Bean, or Brick Red to produce an oilspot effect.  It is also a beautiful soft blue on its own, making it suited to decorative and functional ware.

The Texas Two-Step Oilspots are a specialized series that use pairs of glazes to create unique effects. Anywhere that one of the five overcoats is laid on top of Licorice, Coffee Bean, or Brick Red, a stunning spotted pattern will appear during firing.  Thicker applications lead to bigger spots. Try using wax resist after the first layer to create negative space designs.

Fired
Every kiln and firing is different. It is best to use witness cones in every firing.

Coyote glazes are designed to be fired between witness cone 5 and witness cone 6.

Cone readings are a combintation of time and temperature, and do not correspond directly to any specific temp in degrees. Most digitally controlled kilns have a pre-programmed cone fire setting that will allow you to reach the proper temperature with minimal fussing (we use a cone 5, fast, with 30 minute hold.) For manual (sitter) kilns we recommend using a 6 cone.

Thermocouples and other electronic measuring devices are prone to error and degrade over time. The only way to be certain that your kiln is firing to the right temperature is to use witness cones every time you fire your kiln.
The tip of your self supporting cone 5 should be at least even with the base, and the tip of the cone 6 should not touch the shelf.

Test all foodware to determine food safety.

 

MELD U AAN VOOR DE NIEUWSBRIEF