SS5 Satin Colors Sample kit – Coyote

54,50

SS5 Sample kit Satins
Steengoed/ stoneware
fire at cone 5/6
stooktemperatuur 1180 – 1220 graden

Op voorraad

Satijn Glazuren
Een verbazingwekkende verscheidenheid aan heldere, kleurrijke glazuren met een rijke satijnen afwerking. Deze glazuren zijn geschikt voor gebruik in voedsel, maar zijn veel minder glanzend dan de meeste praktische glazuren. Hun gladde, boterachtige glans moet u voelen om het te geloven. Twaalf kleuren in 4oz. potjes.

Satin Glazes
An amazing variety of bright, colorful glazes with a rich satin finish. These glazes are suitable for food use, but are much less glossy than most practical glazes. Their smooth, buttery touch has to be felt to be believed. Twelve colors in 4oz. jars.

 

Every kiln and firing is different. It is best to use witness cones in every firing.

Coyote glazes are designed to be fired between witness cone 5 and witness cone 6.

Cone readings are a combintation of time and temperature, and do not correspond directly to any specific temp in degrees. Most digitally controlled kilns have a pre-programmed cone fire setting that will allow you to reach the proper temperature with minimal fussing (we use a cone 5, fast, with 30 minute hold.) For manual (sitter) kilns we recommend using a 6 cone.

Thermocouples and other electronic measuring devices are prone to error and degrade over time. The only way to be certain that your kiln is firing to the right temperature is to use witness cones every time you fire your kiln.
The tip of your self supporting cone 5 should be at least even with the base, and the tip of the cone 6 should not touch the shelf.

May not fit all clay bodies. Test for shivering on your clay.
Store in a warm place. Crystals may form in liquid glaze if kept below 65°F
Test all foodware to determine food safety.

 

MELD U AAN VOOR DE NIEUWSBRIEF