SS6 Shino Sample kit – Coyote

54,50

SS6 Sample kit Shino
Shino Serie
Steengoed/ stoneware
fire at cone 5/6
stooktemperatuur 1180 – 1220 graden

Op voorraad

Artikelnummer: ss6 Categorieën: , , Tags: , , , , , ,

Shino Glazuren

Twaalf potten van 4oz. van onze betrouwbare en prachtige Shino glazuren. Ontworpen om gasgestookte shino’s na te bootsen, breken deze natuurlijke kleuren over textuur en zijn goed te combineren met andere glazuren. Perfect voor beginners en professionals.

Twelve 4oz. jars of our reliable and beautiful Shino glazes. Designed to emulate gas-fired shinos, these natural colors break over texture and layer well with other glazes. Perfect for beginners and masters alike.

Every kiln and firing is different. It is best to use witness cones in every firing.

Coyote glazes are designed to be fired between witness cone 5 and witness cone 6.

Cone readings are a combintation of time and temperature, and do not correspond directly to any specific temp in degrees. Most digitally controlled kilns have a pre-programmed cone fire setting that will allow you to reach the proper temperature with minimal fussing (we use a cone 5, fast, with 30 minute hold.) For manual (sitter) kilns we recommend using a 6 cone.

Thermocouples and other electronic measuring devices are prone to error and degrade over time. The only way to be certain that your kiln is firing to the right temperature is to use witness cones every time you fire your kiln.
The tip of your self supporting cone 5 should be at least even with the base, and the tip of the cone 6 should not touch the shelf.

May not fit all clay bodies. Test for shivering on your clay.
Store in a warm place. Crystals may form in liquid glaze if kept below 65°F
Test all foodware to determine food safety.

 

MELD U AAN VOOR DE NIEUWSBRIEF