MBG110 Black Crawl – Coyote NEW


MBG110 Black Crawl – 473ml
Crawl Glazes
Steengoed/ stoneware
fire at cone 5/6

Op voorraad

Black Crawl, een veelgevraagde late toevoeging aan onze Crawl-serie, is een houtskoolkleurig glazuur met een uniek craquelépatroon.

Perfect voor pottenbakkers die op zoek zijn naar iets ongewoons. Onze Crawl glazuren hebben een boomschors oppervlak dat ruw en droog aanvoelt. Om het kruipende effect te bereiken, moeten ze heel dik worden opgebracht, totdat het droge oppervlak van het glazuur barst voor het bakken. Ze kunnen ook over onderglazuren worden gebruikt.

A much requested late addition to our Crawl Series, Black Crawl is a charcoal-colored glaze with a unique crackle pattern.

Perfect for potters looking for something unusual, our Crawl glazes have a tree-bark surface that’s rough and dry to the touch.  To achieve the crawling effect, they must be applied very thick, until the dry surface of the glaze cracks before firing.  They can also be used over underglazes.


Every kiln and firing is different. It is best to use witness cones in every firing.

Coyote glazes are designed to be fired between witness cone 5 and witness cone 6.

Cone readings are a combintation of time and temperature, and do not correspond directly to any specific temp in degrees. Most digitally controlled kilns have a pre-programmed cone fire setting that will allow you to reach the proper temperature with minimal fussing (we use a cone 5, fast, with 30 minute hold.) For manual (sitter) kilns we recommend using a 6 cone.

Thermocouples and other electronic measuring devices are prone to error and degrade over time. The only way to be certain that your kiln is firing to the right temperature is to use witness cones every time you fire your kiln.
The tip of your self supporting cone 5 should be at least even with the base, and the tip of the cone 6 should not touch the shelf.