MBG201 Passion Red – Coyote


MBG201 Passion Red
Vibro Colors
Steengoed/ stoneware
fire at cone 5/6
stooktemperatuur 1180 – 1220 graden


Op voorraad

Artikelnummer: MBG201-P Categorieën: , Tags: , , , , ,

Een levendig rood met een glad glanzend oppervlak. Niet alleen is Passion Red krasbestendig, vlekbestendig en ragebestendig, het is ook minder gevoelig voor het gaatjesprobleem dat veel andere rode glazuren aantast. Levendig, mooi en gemakkelijk te gebruiken, het is snel een Coyote favoriet aan het worden.
Vibro-Colors zijn stabiel en betrouwbaar met veel kleurpigmenten voor een levendige pop. Ze lopen niet, zijn bestand tegen krassen en crazing, en zien er vrijwel hetzelfde uit in alle stoken.

A vivid red with a smooth glossy surface. Not only is Passion Red scratch resistant, stain resistant, and craze resistant, it’s also less prone to the pinhole problem that affects many other red glazes. Vibrant, beautiful, and easy to use, it’s quickly becoming a Coyote favorite. 

Vibro-Colors are as stable and reliable as Enduro-Color Liner Glazes, but loaded up with colorant for a vibrant pop. They do not run, resist scratching and crazing, and look pretty much the same in all firing cycles.

Every kiln and firing is different. It is best to use witness cones in every firing.

Coyote glazes are designed to be fired between witness cone 5 and witness cone 6.

Cone readings are a combintation of time and temperature, and do not correspond directly to any specific temp in degrees. Most digitally controlled kilns have a pre-programmed cone fire setting that will allow you to reach the proper temperature with minimal fussing (we use a cone 5, fast, with 30 minute hold.) For manual (sitter) kilns we recommend using a 6 cone.

Thermocouples and other electronic measuring devices are prone to error and degrade over time. The only way to be certain that your kiln is firing to the right temperature is to use witness cones every time you fire your kiln.
The tip of your self supporting cone 5 should be at least even with the base, and the tip of the cone 6 should not touch the shelf.

Test all foodware to determine food safety